Maytag UKF8001 PUR Refrigerator Water Filter

The Maytag UKF8001 PUR replacement filter fits Amana, Jenn-Air, Maytag, KitchenAid, Sears, Kenmore, and Whirlpool refrigerators with a long, round filter that swings down from the ceiling of the fridge.

This filter was previously known as the PuriClean II UKF8001AXX.

The UKF8001 refrigerator/icemaker water filter replaces the following older filter part numbers:

• UKF8001, UKF8001T, 8001P, UKF8001P, UKF8001AXXP
• UKF8001AXX, UKF8001AXX-750
• WF50, OWF50, WF51, OWF51
• WF50-NI300, OWF50-NI300, WF50-NI500, OWF50-WI500
• WF50-KNI300
• WF50-WI500, WF50-KWI500
• 67002269, 67002671, 67003523
• 67003526, 67003527, 67003528
• 67003591, 67003727, 67006474
• 67006637
• 12589201, 12589203, 12589206
• 12589208, 12589210

• 4396395, 4396395P, 4396395T, 8171032, 8171249

• 46-9005, 469005, 9005, 9005P
• 46-9006, 469006, 9006, 9006P
• 46-9992, 469992, 9992, 9992P
• 469005750, 469005-750, 46-9005-750
• 469006750, 469006-750, 46-9006-750
• 04609005000, 04609006000

*If you have a Kenmore refrigerator whose model number starts with 596, your fridge was made by Amana.

Specifications

• Filter Life: 6 months or 750 gallons (whichever comes first)
• Flow Rate: 0.78 gallons per minute
• Operating Pressure: 33-120 psi
• Operating Temperature: 33-100 °F
• Filter Size: 8" (Length) x 2-1/4" (Diameter)
• Country of Origin: U.S.A.

The Maytag UKF8001 filter cartridge replacement (previously called PuriClean II UKF8001AXX) is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 and 53 for the reduction of:

• 99.35% of Lead
• 98.72% of Mercury
• 99.99% of Asbestos
• 99.99% of Cysts
• 95.71% of Benzene
• 99.76% of P-Dichlorobenzene
• 98.74% of Carbofuran
• 76.99% of Atrazine
• 98.72% of Lindane
• 92.97% of Toxaphene
• 97.26% of Chlorine
• 97.09% of Turbidity
• 98.68% of Particulates (Class I)

• Unlatch the plastic filter cover, and let it swing down (so you can see the filter)
• Turn the used filter counterclockwise 1/4 turn and pull the filter straight down (The water shuts off automatically so you don’t have to worry about flooding your refrigerator)
• Push the filter straight up into the fridge and turn it clockwise 1/4 turn
• Swing the plastic filter cover up until it “snap“ closes
• If your refrigerator has a “Change Filter“ light, reset it

• Press the dispenser Lock and Auto Light buttons and hold them down for approx. 4 seconds
• Release the butons once the filter status indicator begins to flash

• Press the dispenser Lock and Water buttons and hold them down for approx. 4 seconds
• Release the butons once the filter status indicator begins to flash