Whirlpool 8171414 PUR Refrigerator Water Filter

NSF Certified
List Price: $42.99 Our Price: $33.99 Save: $9.00!
See notes below
Replace every 6 months
  • Compatible Part Numbers
  • Specifications & Instructions

The 8171414 has been discontinued and replaced with EDR8D1. The EDR8D1 will fit any refrigerator that currently uses the 8171414.

The genuine OEM Whirlpool / KitchenAid 8171414 Refrigerator Ice & Water Filter fits Whirlpool, KitchenAid, Jenn-Air, and Kenmore refrigerators with a round plastic filter located inside the refrigerator compartment.

The Whirlpool 8171414 refrigerator/icemaker water filter replaces the following older part numbers:

  • 8171414R, 8171414P, 8171414T, WFI-NLC200, NLC200, WFI-NLCS200, NLCS200
  • 8171788
  • Filter Life: 6 months or 200 gallons (whichever comes first)
  • Flow Rate: 0.5 gallons per minute
  • Operating Pressure: 30-120 psi
  • Operating Temperature: 33-100 °F
  • Filter Size: 5-3/4" (Length) x 3-1/2" (Diameter)
  • Country of Origin: Mexico

Contaminant Reduction

The Whirlpool 8171414 filter cartridge replacement is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53 for the reduction of:
  • 97.00% of Chlorine
  • 99.30% of Lead
  • 99.99% of Cysts
  • 99.50% of Turbidity
  • 99.96% of Particulates
How to Replace the Whirlpool / KitchenAid 8171414 Filter
  • Turn the used filter counterclockwise 1/4 turn and pull the filter straight out (The water shuts off automatically so you don’t have to worry about flooding your refrigerator)
  • Push the new filter straight into the fridge and turn it clockwise 1/4 turn
  • If your refrigerator has a “Change Filter“ light, reset it
How to Reset the "Change Filter" Light
  • Press the light switch (the one that the refrigerator door presses every time you close the door) 5 times within 10 seconds
  • If the refrigerator has a filter button, press and hold it for 5-10 seconds