GE MWFINT Refrigerator Water Filter (International Version)

The GE MWFINT is an international version of the GE MWF and offers the same, NSF-certified contaminant removal as the GE MWF. The construction and filtration quality are identical, and the only differences between the two models are packaging and color.

Specifications

• Filter Life: 6 months or 300 gallons (whichever comes first)
• Flow Rate: 0.5 gallons per minute
• Operating Pressure: 40-120 psi
• Operating Temperature: 33-100 °F
• Filter Size: 5-1/4" (Length) x 3-1/2" (Diameter)
• Country of Origin: U.S.A.

Contaminant Reduction The GE SmartWater MWFINT filter cartridge replacement is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 and 53 for the reduction of:

• 96.00% of Chlorine
• 99.10% of Particulates (Class I)
• 99.00% of Lead
• 93.00% of Mercury
• 99.00% of Asbestos
• 96.00% of Benzene
• 99.00% of P-Dichlorobenzene
• 99.99% of Cysts
• 94.00% of Atrazine
• 99.00% of Alachlor
• 98.00% of Carbofuran
• 99.00% of Lindane
• 93.00% of Toxaphene
• 98.00% of 2,4-D
• 98.00% of Turbidity

How to Replace the GE SmartWater MWF INT

• Turn the used filter counterclockwise 1/2 turn and pull the filter straight down (The water shuts off automatically so you don’t have to worry about flooding your refrigerator)
• Fill the new filter with water (You may use cold water from your tap)
• Push the filter straight up into the fridge and turn it clockwise 1/2 turn
• If your refrigerator has a “Change Filter“ light, reset it

How to Reset the "Change Filter" Light

• Press and hold the “Reset Water Filter” button on the dispenser for 3 seconds